CPVC Pipe Fittings Names PDF

CPVC Pipe Fittings Names in English PDF Download Link can be found at the bottom of this article. You can download CPVC Pipe Fittings Names PDF in English directly for free using download button.

PDF INFO

Download

Click the links given below to download PDF.

Download PDF

Easy and 100% leakproof installation.

Step 1: Cutting Measure the pipe length accurately and make a visible marking using a felt tip pen. Ensure that the pipe and fittings are size compatible. You can easily cut with a plywood cutting saw/ ratchet cutter or a wheel cutter. Cutting the pipe as squarely as possible (at 90°) provides optimal bonding area within a joint. Inspect pipe ends thoroughly prior to making a joint. If a crack or splintering is noticed cut-off a minimum of 25 mm beyond the visible crack before proceeding.

Step 2: Deburring/Beveling Burrs in and on pipe end can obstruct flow/proper contact between the pipe and socket of the fitting during assembly and should be removed from both in and outside of the pipe. A 15 mm dia half round file/a pen knife or a deburring tool are suitable for this purpose. A slight bevel on the end of the pipe will ease entry of the pipe into the socket of the fitting socket.

Step 3: Fitting Preparation Using a clean dry rag, wipe the dirt and moisture from the fitting sockets and pipe end. Dry fit the pipe to ensure total entry into the bottom of the fittings socket and make a visible marking using a felt tip pen.

Step 4: One Step Solvent Cement Procedure Use only Ashirvad FLOWGUARD® PLUS™ CPVC Solvent cement conforming to ASTM F-493 to ensure a perfect solvent weld joint. When making a joint, apply an even coat of solvent cement at the end of the pipe and also inside the fitting socket. Do not use thickened or lumpy solvent cement. It should have a flow consistency like that of syrup or paint.

Step 5: Assembly Immediately insert the pipe into the fitting socket, rotate the pipe 1/4 to 1/2 turn while inserting. This motion ensures an even distribution of solvent cement within the joint. Properly align the fittings as per patented alignment system shown with picture diagram on the right side. Hold the assembly for 30 seconds to allow the joint to setup and avoid push-out.

A bead of One-Step solvent cement must be formed around the entire socket fitting entrance. With a clean, dry cloth remove the excess solvent cement from the surface of the pipe and fitting.

CPVC Pipe PDF Index List

PDF Download Links

Here you can download PDF by clicking on the link below.
Click the links given below to download PDF.

REPORT THIS

If the download link of PDF is not working or you have any other problem with it, Leave a comment/feedback. If PDF is copyright protected Contact Us. We will remove the PDF.